Web Configurator - ZyXEL Communications ZyWALL USG100-Plus User Manual

Chapter 1 Introduction

Web Configurator

The Web Configurator allows easy ZyWALL setup and management using an Internet browser. This
User's Guide provides information about the Web Configurator.
Figure 8 Managing the ZyWALL: Web Configurator
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the ZyWALL. Access it using remote
management (for example, SSH or Telnet) or via the physical or Web Configurator console port.
See the Command Reference Guide for CLI details. The default settings for the console port are:
Table 1 Console Port Default Settings
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control
Vantage CNM
The browser-based Vantage CNM (Centralized Network Management) global management tool lets
administrators to manage multiple devices. Use the System > Vantage CNM screen to allow your
ZyWALL to be managed by the Vantage CNM server. See the Vantage CNM User's Guide for details.
1.4 Web Configurator
In order to use the Web Configurator, you must:
• Use one of the following web browser versions or later: Internet Explorer 7, Firefox 3.5, Chrome
9.0, Opera 10.0, Safari 4.0
• Allow pop-up windows (blocked by default in Windows XP Service Pack 2)
• Enable JavaScripts, Java permissions, and cookies
The recommended screen resolution is 1024 x 768 pixels.
8
VALUE
115200 bps
8
None
1
Off
ZyWALL USG100-PLUS User's Guide