ZyXEL Communications ZyWALL USG100-Plus User Manual page 76

Chapter 4 Create Secure Connections Across the Internet
Do the following to configure the L2TP VPN example:
Click Configuration > VPN > IPSec VPN > VPN Gateway and double-click the
1
Default_L2TP_VPN_GW entry.
Select Enable.
Set My Address. This example uses a WAN interface with static IP address 172.16.1.2.
Set Authentication to Pre-Shared Key and configure a password. This example uses top-
secret. Click OK.
Click the VPN Connection tab and double-click the Default_L2TP_VPN_Connection entry.
2
Click Create New Object > Address and create a host type address object that contains the My
Address IP address you configured in the Default_L2TP_VPN_GW. The address object in this
example uses the WAN interface's IP address (172.16.1.2) and is named L2TP_IFACE.
Select Enable, set Application Scenario to Remote Acces and Local Policy to L2TP_IFACE,
and click OK.
76
172.16.1.2
ZyWALL USG100-PLUS User's Guide