ZyXEL Communications ZyWALL USG100-Plus User Manual page 35

Figure 23 6to4 Tunnel Configuration Concept
LAN1
(IPv6)
2.6.2 Setting Up the LAN IPv6 Interface
In the CONFIGURATION > Network > Interface > Ethernet screen's IPv6 Configuration
1
section, double-click the lan1.
The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6.
2
Type 2002:7a64:dcee:1::111/128 in the IPv6 Address/Prefix Length field for the LAN1's IP
address.
Enable Router Advertisement. Then click Add in the Advertised Prefix Table to add
2002:7a64:dcee:1::/64. The LAN1 hosts will get the network prefix through the router
advertisement messages sent by the LAN1 IPv6 interface periodically. Click OK.
ZyWALL USG100-PLUS User's Guide
6to4 TUNNEL
Chapter 2 How to Set Up Your Network
WAN1
(IPv4)
35