ZyXEL Communications ZyWALL USG100-Plus User Manual page 28

Chapter 2 How to Set Up Your Network
2.5.2 Setting Up the LAN Interface
In the CONFIGURATION > Network > Interface > Ethernet screen, double-click the lan1 in
1
the IPv6 Configuration section.
The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6.
2
Select Enable Router Advertisement and click Add and configure a network prefix for the LAN1
(2006:1111:1111:1111::/64 in this example). Click OK.
You have completed the settings on the ZyWALL. But if you want to request a network address
prefix from your ISP for your computers on the LAN, you can configure prefix delegation (see
Section Section 2.5.4 on page
28
29).
ZyWALL USG100-PLUS User's Guide