Fan1 ~ Fan4, Fana Reading; 12V, Vdimm, 5Vcc, -12V, Avcc, 3.3Vcc, Vsb, Vbat; Acpi Configuration; High Performance Event Timers - Supermicro Supero X9SCL-F User Manual

X9SCM/X9SCM-F/X9SCL/X9SCL-F/X9SCL+-F
The information provided above is for your reference only. For more information
on thermal management, please refer to Intel's Web site at www.Intel.com.

Fan1 ~ Fan4, FanA Reading

This feature displays the fan speed readings from fan interfaces Fan1 through
Fan4 and FanA.

12V, VDIMM, 5VCC, -12V, AVCC, 3.3VCC, VSB, VBAT

This feature displays the current voltages of the above voltage monitors.

ACPI Configuration


Use this feature to configure Advanced Configuration and Power Interface (ACPI)
power management settings for your system.

High Performance Event Timers

Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
Suspend Mode
This setting allows you to configure the ACPI (Advanced Configuration and Power
Interface) sleep state for your system when it is in the Suspend mode. The options
are Suspend Disabled and S1 (POS).

NUMA Support

This feature Enables the Non-Uniform Memory Access ACPI support. The options
are Enabled and Disabled.

WHEA Support

This feature Enables the Windows Hardware Error Architecture (WHEA) support
for the Windows 2008 operating system (and later versions). The options are
Enabled and Disabled.
4-14