Specifi Cations - Md210C2 - NEC MD210C2 Installation & Maintenance Manual

21.3" diagnostic imaging color lcd monitor
Hide thumbs Also See for MD210C2:
Table of Contents

Advertisement

Specifi cations - MD210C2
Monitor Specifi cations
LCD Module
Viewable Image Size:
Native Resolution (Pixel Count):
Input Signal
DisplayPort:
DisplayPort Connector:
DVI:
DVI-D 24pin:
Display Colours
Synchronization Range
Clock Frequency
Viewing Angle
Image Formation Time
Resolutions Supported (Some systems may
not support all modes listed).
Active Display Area
Landscape: Horiz.:
Portrait: Horiz.:
USB Hub
Load Current:
Power Supply
Current Rating
Dimensions
Height Adjustment:
Weight
Sensor Accuracy and Repeatability
Front Sensor
Repeatability:
Ambient Sensor
Repeatability:
Environmental Considerations
Operating Temperature:
Atmospheric pressure:
Transport/Storage Temperature:
Atmospheric pressure:
At 25 degrees, Target Brightness 400cd/m
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and
necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on the screen is actually one
pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifi cations are subject to change without notice.
MD210C2 Monitor
Diagonal:
54.0 cm/21.3 inches
54.0 cm/21.3 inches
1200 x 1600 (Portrait)
1600 x 1200 (Landscape)
Digital RGB
Digital RGB
1,073,741,824
Horizontal:
31.5 kHz to 74.5 kHz, 99.4 kHz
Vertical:
50 Hz to 85 Hz
162 MHz (Max)
Left/Right:
±88° (CR > 10)
Up/Down:
±88° (CR > 10)
40 ms (Typ.)
1
640 x 480*
at 60 Hz to 85 Hz
720 x 400*
1
at 70 Hz to 85 Hz
1
800 x 600*
at 56 Hz to 85 Hz
832 x 624*
1
at 75 Hz
1
1024 x 768*
at 60 Hz to 85 Hz
1152 x 864*
1
at 70 Hz to 85 Hz
1152 x 870*
1
at 75 Hz
1280 x 960*
1
at 60 Hz
1280 x 1024*
1
at 60 Hz to 85 Hz
1600 x 1200 at 60 Hz........................................... for optimal display performance.
1200 x 1600 at 60 Hz........................................... NEC DISPLAY SOLUTIONS recommended resolution
432.0 mm/17.0 inches
Vert.:
324.0 mm/12.8 inches
324.0 mm/12.8 inches
Vert.:
432.0 mm/17.0 inches
I/F:
USB Specifi cation Revision 2.0
Port:
Upstream 1
Downstream 2
Maximum 0.5A per port
AC 100-240 V ~ 50/60 Hz
1.1 - 0.40 A
Landscape:
473.0 mm (W) x 393.6 - 543.6 mm (H) x 235.5 mm (D)
18.6 inches (W) x 15.5 - 21.4 inches (H) x 9.3 inches (D)
Portrait:
373.4 mm (W) x 490.6 - 593.4 mm (H) x 235.5 mm (D)
14.7 inches (W) x 19.3 - 23.4 inches (H) x 9.3 inches (D)
150.0 mm/5.9 inches (Landscape orientation)
102.8 mm/4.0 inches (Portrait orientation)
11.8 kg (26.0 lbs)/Without stand: 7.8 kg (17.2 lbs)
Accuracy:
+/-10% (Lv>10cd/m
+/-2%
Accuracy:
+/-10%
+/-5%
5°C to 35°C/41°F to 95°F
Humidity:
20% to 80%
Altitude:
-1,246 to 9,842 Feet/-380 to 3,000 m
700hPa to 1060hPa
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Altitude:
-1,246 to 39,370 Feet/-380 to 12,000 m
200hPa to 1060hPa
2
Notes
Active matrix; thin fi lm transistor (TFT) liquid crystal
display (LCD); UA-SFT (IPS) 0.270 mm dot pitch;
760 cd/m
luminance; 1400:1 contrast ratio (typical).
DisplayPort Complies with Standard V1.1a,
applicable to HDCP
DVI, applicable to HDCP
Depends on display controller used.
Automatically
Automatically
20 ms (Gray to gray Typ)
NEC DISPLAY SOLUTIONS recommended resolution
for optimal display performance.
For Mexico 2.0A
2
), +/-1cd/m
2
(10cd/m
2
≧ Lv>2cd/m
(Standard Deviation)
(Light source: LED Lamp, Distance: 58 cm,
Angle: 25 +/-5 degrees from the vertical axis of the
ambient sensor).
(Same as Accuracy conditions).
English-23
2
2
max luminance; 400 cd/cm
2
), +/-0.5cd/m
2
(Lv ≦ 2cd/m
2
)
calibrated

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdc3-bndn1Md211c2Md211c3

Table of Contents