Screen Rotation - NEC MD210C2 Installation & Maintenance Manual

21.3" diagnostic imaging color lcd monitor
Hide thumbs Also See for MD210C2:
Table of Contents

Advertisement

Screen Rotation

Before rotating, the screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching your
fi ngers. Disconnect all cables.
To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1).
To rotate the screen, place hands on each side of the monitor and turn clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape (Figure R.1).
To rotate the OSD menu between landscape and portrait, refer to Controls section.
Tilt
Grasp both sides of the monitor with your hands and adjust the tilt as desired (Figure TS.1).
NOTE:
Handle with care when tilting the monitor.
Swivel
Grasp both sides of the monitor with your hands and adjust the swivel as desired (Figure TS.2).
Figure R.1
Figure TS.1
Figure TS.2
English-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdc3-bndn1Md211c2Md211c3

Table of Contents