Table of Contents
Advertisement
EDID SELECTION
During communication via EDID* with the signal source (computer), the preferred signal timing of the monitor is provided.
AUTO: The preferred timing depends on the physical orientation of the monitor. Landscape orientation:
1600x1200 pixels, portrait orientation: 1200x1600 pixels for MD210C2/MD211C2. Landscape orientation:
2048x1536 pixels, portrait orientation: 1536x2048 pixels for MD211C3. The orientation is automatically detected by a
sensor.
LANDSCAPE: The preferred timing is fi xed to landscape orientation: 1600x1200 pixels for MD210C2/MD211C2 and
2048x1536 pixels for MD211C3.
PORTRAIT: The preferred timing is fi xed to portrait orientation: 1200x1600 pixels for MD210C2/MD211C2 and
1536x 2048 pixels for MD211C3.
NOTE: If you have any problems, please refer to the Troubleshooting section of this Manual.
If a change was made in EDID SELECTION, the connected computer must be restarted to recognize this
change.
VIDEO DETECT
Selects the video detection method, when more than one video signal source is connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from a different
video source. If a video signal is supplied by the other video source, the monitor automatically switches to the new
video source. The monitor will not look for any other video signals, as long as the current video signal is present.
LAST: When the monitor is displaying a signal from the current video source and a new secondary video source is
supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input
signal is not present, then the monitor searches for a video signal from a different video source. If a video signal is
supplied by the other video source, the monitor automatically switches to the new video source.
NONE: The monitor will not search for any other video sources, unless the monitor is turned OFF and ON again with
the Power button.
OFF MODE
The Intelligent Power Manager (IPM) in the computer's operating system allows the monitor to switch to power save
mode after a period of user inactivity.
The OFF MODE has 3 settings.
OFF: The monitor does not switch to power save mode when the input signal is lost.
STANDARD: The monitor switches to power save mode automatically when the input signal is lost.
OPTION: Monitor enters power save mode automatically when the amount of ambient light goes below the level that is
determined by the user. The level can be adjusted in OFF MODE SETTING in Tag 5 of the Advanced OSD menu.
When in power save mode, the LED on the back side of the monitor blinks amber. While in power save mode, push
any of the buttons, except for POWER and SELECT to return to normal.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
QA TEST
Provides a quick daily visual image quality check of this diagnostic monitor by just using a button on the monitor.
MENU Tools
LANGUAGE
The OSD control menus are available in nine languages.
OSD LEFT/RIGHT
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu left or right.
OSD DOWN/UP
You can choose where you would like the OSD control menu to appear on your screen. Selecting OSD Location allows
you to manually adjust the position of the OSD control menu Up or Down.
OSD TURN OFF
The OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touch
of a button to close the OSD control menu. The preset choices are 10-120 seconds in 5-second increments.
* EDID: The monitor informs the computer's operating system about its own characteristics, features and video timing modes via the EXTENDED DISPLAY IDENTIFICATION DATA standard.
English-14
Advertisement
Table of Contents
