Specifi Cations; Troubleshooting - NEC MD302C6 Installation & Maintenance Manual

Table of Contents

Advertisement

Specifi cations
Monitor Specifi cations
LCD panel color
LCD
Pixel pitch (H x V)
Display area (H x V)
Pixel (H x V)
Display colors
Backlight
LCD Optical characteristics (typ.)
Luminance
Input sync signal
Available resolution
Input connectors
Power Supply
Current Rating
USB Hub
Ambient conditions
Humidity (no condensation):
Dimensions & weight
Safety certifi cations
*1 billion = 10
9
NOTE:
Technical specifi cations are subject to change without notice.
MD302C6 is intended to be used in rooms with less than 50 to 69.7 lx ambient light.
The maximum ambient light level depends on technical QA standards and/or national obligations.

Troubleshooting

The display won't turn on! (The power indicator is off.)
Make sure the display is connected to the power outlet.
Check to see if the display is turned on.
The screen is not lit!
Check if cables are connected correctly.
Check if the computer is turned on.
If the LED indicator is orange, the computer may be in energy saving mode. Press any key on the keyboard to wake up
the computer.
The input signal frequency or display resolution may not be appropriate for the display. Refer to the computer instruction
manual and adjust the frequency and/or resolution.
If the LED is red, this may be an error indication. Contact your supplier.
Images are not displayed properly!
The display resolution may not be appropriate for the display. Refer to the computer instruction manual and adjust the
resolution.
The refresh rate is set to 60Hz (dual-link mode) and resolution loss (scan line gaps) occurs!
This can happen when a DVI Single Link cable or a DisplayPort to DVI Single Link adapter is used. Use the supplied
dual-link cable which supports both single-link (30Hz) and dual-link (60Hz) modes, or set the refresh rate to 30Hz.
MD302C6
Clear Base
30.0-inch (76.8 cm), color, TFT, Active matrix type, normally black Anti-glare
0.197 x 0.197 mm
645.5 x 403.05 mm
3280 x 2048
8 bit:16.77 million out of 68 billion*
10 bit: 1.07 billion out of 68 billion*
LED backlight
Viewing angle: 170° horizontal/vertical (contrast ratio ≥ 10:1)
Contrast ratio: 1000:1 (Viewing angle of 0° horizontal and vertical)
DICOM calibrated
Maximum
DVI 1.0 compliant, DisplayPort 1.1a compliant
640 x 480
800 x 600
1024 x 768
1536 x 2048 (at Fv=60Hz), 3072 x 2048 (at Fv=30Hz)
1640 x 2048 (at Fv=60Hz), 3280 x 2048 (at Fv=30Hz)
DVI 24-pin connector (x2), DisplayPort connector (x2)
AC 100-240 V ~ 50/60 Hz
4.0 - 1.67 A
USB Rev. 2.0 compliant, Self-powered
USB upstream port (x1), USB downstream ports (x2)
Temperature:
Operating: 5 - 35°C, Transport / Storage: -20 - 60°C
Operating: 20 - 80%, Transport / Storage: 10 - 85%
Air pressure:
Operating: 700 - 1060hPa, Transport / Storage: 266 - 1060hPa
Net:
695.6 x 486.5 - 618.2 x 301.6 mm (W x H x D) approx. 17.6 kg (38.8 lbs)
27.4 x 19.2 - 24.3 x 11.9 inches (W x H x D)
ANSI/AAMI ES60601-1:2005+A1 (2012), CAN/CSA-C22.2 No. 60601-1:08, FCC-B, ICES-003-B,
CE-MDD, VCCI-B, FDA510(K)
Notes
400 cd/m
550 cd/m
English-28
2
as factory default
2
(800 cd/m
2
typ. as LCD component)

Advertisement

Table of Contents
loading

Table of Contents