Gs752Tp Front Panel And Back Panel Configuration - NETGEAR ProSafe GS728TP Hardware Installation Manual

GS752TP Front Panel and Back Panel Configuration

The GS752TP Gigabit Smart Switch has 48 10/100/1000 Mbps copper ports and four
dedicated 100/1000 Mbps SFP fiber ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 2 illustrates the front panel of the GS752TP Gigabit Smart Switch.
Power, Fan, PoE Max,
and LED Mode LEDs
Factory
Defaults button
Reset button
Figure 2. Front panel
The front panel contains the following:
• 48 RJ-45 connectors for 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching
ports.
• Ports 1–8 are PoE+ (30W) capable; ports 9–48 are PoE (15.4W) capable.
• Four dedicated 100M/1000 Mbps SFP Gigabit Ethernet switching ports.
• Reset button to restart the device.
• Recessed Factory Defaults button to restore the device back to the factory defaults.
• Select button to change the working mode of the port LEDs with either PoE mode or
Ethernet mode.
• Port Status and Port Speed LEDs.
• Power, Fan Status, Max PoE, and LED Mode LEDs.
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Link/ACT LEDs
10
SFP ports