Port Leds - NETGEAR ProSafe GS728TP Hardware Installation Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
The front panel contains the following:
• 24 RJ-45 connectors for 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching
ports.
• Ports 1–24 are PoE+ (30W) capable.
• Four dedicated 100M/1000 Mbps SFP Gigabit Ethernet switching ports.
• Reset button to restart the device.
• Recessed Factory Defaults button to restore the device back to the factory defaults.
• Select button to change the working mode of the port LEDs with either PoE mode or
Ethernet mode.
• Port Status and Port Speed LEDs.
• Power, Fan Status, Max PoE, and LED Mode LEDs.
Figure 7 illustrates the NETGEAR GS728TPP Gigabit Smart Switch back panel.
RPS connector
Figure 7. Back panel
The back panel contains:
• A power connector
• An RPS connector (redundant power supply)
13
Power connector