Chapter 2 Physical Description; Gs752Txs Front-Panel And Back-Panel Configuration - NETGEAR GS752TXS Hardware Installation Manual

Physical Description
2.
This chapter describes the GS752TXS Smart Switch hardware features. Topics include:

GS752TXS Front-Panel and Back-Panel Configuration

•
• LED Designations
• Device Hardware Interfaces
GS752TXS Front-Panel and Back-Panel Configuration
The GS752TXS Smart Switch has 48 10/100/1000 Mbps copper ports and four dedicated
1000 Mbps/10Gbps SFP+ fiber ports. Up to two fiber ports (port 51 and 52) at a time can be
used as stacking ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 2 illustrates the front panel of the NETGEAR GS752TXS Smart Switch.
Power, Fan, and
Stack Master LEDs
Stack ID LED
Link/Act Mode
Power
Green=Link at 1G
Fan
Yellow=Link at 10/
100M
Stack
Master
ID
Reset Factory
Defaults
Factory
Defaults Button
Reset Button
Figure 2. Front Panel
The front panel contains the following:
• 48 RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports
Link/Speed/ACT LEDs
10/100/1000 Ethernet Ports
1000M/10G
SFP Ports
Chapter 2. Physical Description
2
SFP
+
Green=10G Link Yellow=1G
Blink=ACT
| 12