Gs516Tp Front Panel And Back Panel Configuration - NETGEAR ProSafe GS516TP Installation Manual

GS516TP Front Panel and Back Panel Configuration

The smart switch has sixteen 10/100/1000 Mbps copper ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
The following figure illustrates the front panel of the smart switch.
PD15, PD16, Power,
Fan, PoE Max LEDs
Factory
Defaults button
Reset button
Figure 1. Front panel
The front panel contains the following:
• 16 RJ-45 connectors for 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching
ports.
• Ports 1–8 are PSE ports providing up to 15.4W DC power.
• Port 15 and 16 are PD ports receiving power from power devices.
• Reset button to restart the device.
• Recessed Factory Defaults button to restore the device back to the factory defaults.
• PoE status (Ports 1-8) and Port Link/Speed LEDs (Ports 1-16).
• Power, Fan Status and Max PoE.
PD15 and PD16 LEDs for PD power source status.
•
GS516TP Gigabit PoE Smart Switch
Link/ACT LEDs
PoE Status LEDs
Physical Description
11