Interface; Leds; Performance Specifications - NETGEAR ProSafe GS728TP Hardware Installation Manual

IGMP snooping v1/v2/v3
IEEE 802.1 p Class of Service (CoS)
SNTP (Simple Network Time Protocol) three servers. Disabled by default.
Jumbo frame support (9K)
IPv6 management and Quality of Service (QoS)
Static routing
MLD snooping
DHCP snooping
ACLs (MAC, IPv4, IPv6, and TCP/UDP based)

Interface

GS752TP:
• 48 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all
ports)
• Four SFP slots (ports 49–52) to support 100M/1000M optical module
GS728TP and GS728TPP:
• 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all
ports)
• Four SFP slots (ports 25–28) to support 100M/1000M optical module

LEDs

Per port: Link/Act Mode
Per device: Power, Fan, PoE Max, LED Mode

Performance Specifications

Forwarding modes: Store-and-forward
Bandwidth (per unit): 56 Gbps for GS728TP/GS728TPP, 104 Gbps for GS752TP
Address database size: 8K Media Access Control (MAC) addresses per system
PoE power budget:
• GS752TP: Maximum 384W (AC)
• GS728TP: Maximum 192W (AC)
GS752TXS Smart Switch
32