Troubleshooting; 7-2.Load Test Mode - LG F14A8TDSA Series Service Manual

7. TROUBLESHOOTING

7-1. CHECK BEFORE SERVICE
1
Before servicing ask the customer what the trouble is.
2
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
3 Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
4
Then, service and repair.
5
6 After servicing, operate the appliance to see whether it works OK or NOT.
7-2. LOAD TEST MODE
1 Touch and Hold
'Medic
and then press 'Power' button.
2 The washer must be empty and the controls must be in the off state.
3 Press Power with above two buttons pressed and then buzzer will sound.
4 Press the Start/Pause button repeatedly to cycle through the test modes
F1495BDS(1~9), F1495BD(1~9)
Number
0 Turns on all light and locks the door.
1 Tumble clockwise
2 Low speed spin
3 High speed spin
4 Inlet valve for prewash turns on.
5 Inlet valve for main wash turns on.
6 Inlet valve for hot water turns on.
7 Inlet valve for steam turns on.
8 Tumble counterclockwise
9 Heater turns on for 3 sec.
10 Circulation pump turns on.
11 Drain pump turns on.
12 Sensor for steam
13 Steam heater turns on for 1.2 sec.
14 Off
Rinse' & 'Rinse' buttons
Check Point
Display Status
PGM Version Information
rpm(42~50)
rpm (60)
rpm (130~140)
Water level frequency
Water level frequency
Water level frequency
Water level frequency
rpm
Water temperature
Water level frequency
Water level frequency
Water level frequency
AG Temperature
-
21
Remark
For Hot&Cold Model
For Steam Model
For Steam Model
For Steam Model