LG F14A8TDSA Series Service Manual page 47

INLET VALVE
1
2 3
DOOR
1 Disconnect the wiring connector.
2 Remove the valve by two screws of the valve
holder.
When reconnecting the connector
VALVE (STEAM)
1
2
VALVE (PRE-WASH)
3
VALVE (NORMAL-WASH)
• Rating : 220/240V 50/60Hz
• Resistant : 3.5~4.5kΩ
1 Open the door completely.
2 Remove the three screws from the hinge.
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Removing method of remained water
Pull it out from hose.
First, prepare a bucket to put in the remained
water.
CAP(REMAING HOSE)
50
VIOLET/BLACK-BLACK
WHITE/BLACK-BLACK
GRAY/BLACK