LG F14A8TDSA Series Service Manual page 51

PUMP
Bellows
Pump
Hose
Remaining
Hose
HEATER
1 Disassembly Top Plate, Control Panel
Assembly, Drawer Panel Assembly,
Cabinet Cover Assembly, Lower Cover
Assembly.
2 Unscrew the screws from the Side
cover(Left).
3 Lift and separate the Side(Left) cabinet cover.
4 Remove pump outlet hose.
Circulation
5 Remove tub pump bellows.
Hose
6 Remove cap(Remaining Hose).
7 Disconnect the wiring.
8 Three screws are unscrewed from the cabinet.
9 Remove the pump to arrow direction.
• Rating : 220/240V 50Hz
• Resistant : 162~176Ω
1 Loosen the nut.
2 Remove washing heater by pulling out.
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
54