Tcp Api - Multitech MultiModem iSMS SF100-G Administrator's Manual

Appendix A – Application Programming Interface (API)

TCP API

Configuration of the "TCP Send API" Using the MultiModem iSMS Web Admin Interface
TCP Send API Status:
Enable TCP Send API Status to send SMS / query status using TCP API. By default, TCP Send API is disabled.
TCP Port:
Configure the port to service the TCP Send API. Default is 2040.
Note: MultiModem iSMS can be accessed ONLY from the preconfigured allowed networks.
Example: To access the MultiModem iSMS 204.26.122.125 from 125.63.78.44, you must add the network 125.63.78.0 to
the following MultiModem iSMS window: Admin Access >> Allowed Networks
●
Initiate a raw TCP connection to the MultiModem iSMS IP address over the "TCP Send API" port.
●
Issue send command to send SMS.
●
Issue query command to query the status of send SMS.
TCP Send API Format
/sendmsg?user=admin&passwd=admin&cat=1&enc=0&priority=1&modem=1&to="+9198448956
91"&ton="Bob"&group="eng"&text=Here is the test message
Notes:
"enc" and "priority" parameters are optional.
MultiModem® iSMS System Administrator's Guide 92