Chapter 4 - Using The Multimodem Isms Web Interface; Administration; Administration > System Setup - Multitech MultiModem iSMS SF100-G Administrator's Manual

Chapter 4 – Using the MultiModem
You can use the Web-based configuration and management interface to set up SMS features and parameters. This
chapter describes the Web interface.
Note: The antenna must be attached so the MultiModem iSMS can operate.
IMPORTANT Note About Saving your Settings to Flash Memory
When you have completed your MultiModem iSMS settings, you must go to the Save & Restart menu located at the
top of the window under the menu bar. Then click the Save to Flash save button. This saves all your system settings
to flash memory and prevents them from being lost after a system restart.

Administration

Administration > System Setup
On the System Setup window, you can set up the e-mail address of the administrator to whom e-mails are sent for event
notification. You must enter the e-mail address in proper "user@domain" format.
Configuring E-Mail Notification
E-mail notification is delivered through the Ethernet network with an Internet connection, not through the wireless
cellular connection.
MultiModem® iSMS Administrator's Guide
iSMS Web Interface
30