Saving System Settings - Multitech MultiModem iSMS SF100-G Administrator's Manual

In the Admin Password group, change the password. Change the password immediately after initial installation and
4.
also change it regularly thereafter for security purposes.
● Old Password – Enter the existing password (factory default is admin).
New Password – Enter new password.
●
● Confirmation – Confirm your new password by re-entering it into this field.
Note: You might want to record the new password for future reference.
In the Import Address Book group, click Import. The Import Address Book window displays.
5.
Use this window to upload a database of mobile endpoint contacts. Each contact entry in the CSV (comma separated
values) formatted file is to have 4 values in this order: firstname, lastname, description, phonenumber.
a. To browse for the address file you want to use, click Browse and navigate to the area where your file is located.
Click Upload.
6.

Saving System Settings

When you finish entering MultiModem iSMS settings and configuration data, go to the Save & Restart menu and save the
settings to flash memory.
Doing so saves the new settings in the flash prom and prevents the settings from getting lost at the next power up.
To save:
Click Save to save your system settings to the flash memory.
1.
To restart the MultiModem iSMS, click Restart. This step is optional.
2.
29
Chapter 3 – iSMS Basics and Setup Wizard
MultiModem® iSMS Administrator's Guide