Configuring The Network Parameters For A Udp Plus Network - Intermec CK31 User Manual

2 Make sure that your CK31 is talking to the network and that
the network can see your CK31.
3 Configure security. For help, see "Configuring Security" on
page 49.
The easiest way to configure the network parameters on the
CK31 is to use Intermec Settings. For help, see "Configuring the
CK31 With Intermec Settings" on page 36.

Configuring the Network Parameters for a UDP Plus Network

In a UDP Plus network, the CK31 communicates with a host
computer through the Intermec Application Server.
CK31 in a UDP Plus Network
CK31 Handheld Computer User's Manual
Host
UDP Plus
Ethernet
Intermec Application Server
Chapter 2 — Configuring the CK31
Access point
CK31s
43