Configuring Bluetooth Communications - Intermec CK31 User Manual

Chapter 2 — Configuring the CK31
The Intermec Application Server translates UDP Plus packets on
the wireless network into TCP/IP packets on the wired network
and vice versa. The access point acts as a bridge to allow
communications between the wired network and the wireless
network.
To use wireless communications in a UDP Plus network
1 Configure these network parameters on each CK31 in the
network:
• Network name (SSID)
• Controller IP address
• IP settings (if not using DHCP)
• Network port
2 Make sure that your CK31 is talking to the network and that
the network can see your CK31.
3 Configure the security. For help, see "Configuring Security"
on page 49.
The easiest way to configure the network parameters on the
CK31 is to use Intermec Settings. For help, see "Configuring the
CK31 With Intermec Settings" on page 36.

Configuring Bluetooth Communications

You can send and receive information to devices wirelessly using
the Bluetooth radio. The Bluetooth technology uses short-range
radio links and allows for communications over a 10-meter
(32.8 foot) range. communications
To use Bluetooth communications with the CK31
1 From Intermec Settings, select Communications >
Bluetooth.
2 Set these Bluetooth parameters:
44
Parameter Setting
Power On
Discoverable Enable
Connectable Enable
CK31 Handheld Computer User's Manual