Connecting The Interface Cable; Removing The Interface Cable - Intermec SG10T User Manual

Connecting the Interface Cable

Removing the Interface Cable

SG10T Tethered Scanner User's Guide
The SG10T comes either with a USB or a keyboard wedge cable for
connecting it to the host computer.
To connect the cable, insert it and press firmly until inserted all the
way.
To remove the cable follow these steps:
1 Insert a pin or straightened paper clip into the release hole.
2 Push on the pin or paper clip while pulling out the cable.
1
Chapter 1 — Introducing the SG10T
Click
2
3