Chapter 2 — Scanning with the SG10T
Understanding the SG10T Behavior
Understanding the Status Light
6
The SG10T uses lights and beeps to indicate if a bar code has been
successfully decoded. The following sections describe lights and
beeps.
The status light on the SG10T flashes green. The flash is either long
or short depending on the status of the scanner.
Default SG10T Status Light Description
Light State
Green flash on for 2
seconds
Short green flash
What it Means
•
Power-up
•
The scanner successfully decoded a bar code and
sent the data to the host device
•
The scanner successfully scanned a configuration
bar code
•
The scanner scanned an unexpected bar code
while a configuration procedure was in progress
The scanner successfully scanned a compose bar code
(ASCII character or keyboard key in Code 39) during
a configuration procedure
SG10T Tethered Scanner User's Guide