Installing Applications Using Activesync - Intermec CK30 User Manual

Installing Applications Using ActiveSync

CK30 Handheld Computer User's Manual
Chapter 3 — Developing and Installing Applications
Unless your application and additional data files are very large,
you can place them in the RAM of the unit. They will
automatically be backed up to the Flash File System
(\CK_FFS\Persistent Copy folder). These files will be preserved
through a cold boot, or a complete battery drain and
accompanying cold boot. However, Intermec recommends that
you place your applications files in the CK_FFS or SDMMC
Disk folder.
If you have an SD card inserted in your CK30, it appears as the
SDMMC Disk folder. This folder is the recommended location
for placing your application install files.
There are several ways you can install files and applications on
the CK30:
• ActiveSync
• SD Card
• FTP Server
• Wavelink Avalanche
• SmartSystems Console
The following sections explain how to use each one of these
processes to install your application on the CK30.
You can use ActiveSync to establish a connection between your
PC and the CK30. ActiveSync allows you to transfer files,
synchronize files, perform remote debugging, and other device
management activities. ActiveSync is a free application available
from the Microsoft web site.
To establish a partnership between your PC and the CK30, you
need:
• a USB cable or a female-to-female null modem serial cable.
• an AD1 communications dock.
• ActiveSync version 3.7.1 or later.
85