Intermec CK30 User Manual page 53

CK30 Handheld Computer User's Manual
Navigating in the Configuration Utility (continued)
To Do This:
Return to the
Configuration
Utility main menu
(Home)
Restoring Default Settings
You can restore the CK30 to factory default settings from the
Configuration Utility. For a complete list of the default settings,
see "Default Configuration Settings" on page 160.
Note: Using the Restore Defaults option resets all network
parameters. As a result, you may lose network communications.
This option should only be used by network administrators or
by Intermec support personnel.
To restore factory default settings
1 From the Configuration Utility menu, select Restore
Defaults.
2 Press Enter to select Restore Defaults. The following Restore
Defaults dialog box appears.
3 Press Enter to restore factory defaults.
Your CK30 performs a cold boot and returns all of your
settings to the factory default settings.
4 If you have CAB files loaded on your CK30, you will see a
Confirm File Replace dialog box. Select Yes to All and then
press Enter. The CK30 installs your CAB files.
Chapter 2 — Configuring the CK30
Press:
On the 42-key and 52-key keypads, press
•
C and then 8
On the 50-key keypad , press C and then
•
H
39