Intermec CK30 User Manual page 43

CK30 Handheld Computer User's Manual
Chapter 1 — Using the CK30 Handheld Computer
Undecoded Serial Adapter and Required Cables
Scanner
128X wands*
1550C0500*, 1550C0502*,
1550C0504*
155XE
1400
* These products are not RoHS compliant and are discontinued. This
information is included here only for customers who have already
purchased these products.
Decoded Serial Adapter or AA2 and Required Cables
Decoded
Scanner Serial Adapter
225-715-001
1400
or AA2
225-715-001
1551E*
or AA2
225-715-001
1553E*
or AA2
1800 225-715-001
or AA2
225-715-001
SR60
or AA2
* These products are not RoHS compliant and are discontinued. This
information is included here only for customers who have already
purchased these products.
To attach a scanner to the serial port
1 Connect a scanner to the DB9 connector on the serial adapter
or cable.
2 Hook the serial adapter into the battery on the CK30 and
then snap it into place. If you are using the AA2 serial cable
adapter, attach the 26-pin connector to the serial port.
Undecoded
Serial Adapter Required Cable
225-714-001 069444-005*
225-714-001 068424*
or 068425*
225-714-001
3-606030-10
225-714-001
3-606030-10
Required Cable
3-604032-15,
3-604032-06*, or 3-606032-03*
3-604032-15,
3-604032-06*, or 3-606032-03*
3-604032-15,
3-604032-06*, or 3-606032-03*
3-366032-01*
321-639-002
29