About Bluetooth Communications - Intermec CK3R User Manual

About Bluetooth Communications

CK3R and CK3X Mobile Comptuer User Manual
By default, the 802.11 radio is disabled. Use the following procedure to
enable the Wi-Fi radio using Intermec Settings.
1 Tap Start > Settings > System > Intermec Settings.
2 From the Intermec Settings main menu, tap Communications >
802.11 Radio > Radio Enabled.
3 Select the Radio Enabled check box and tap OK. By default, the
computer uses Funk security and enables DHCP.
4 Use Intermec Settings to configure the parameters you need to use
for communications with your network.
5 Configure 802.11 security.
The CK3 is Bluetooth-enabled, which lets you connect to other
Bluetooth devices such as:
• scanners.
• printers.
• audio devices.
• wireless readers.
You need to turn on the Bluetooth radio before you can discover and
connect to Bluetooth devices. By default, the radio is turned off.
The Bluetooth radio maintains its current state through a warm or
cold boot and maintains virtual COM ports. If you clean boot the CK3,
you must recreate pairings to devices.
You can also access Bluetooth settings using Intermec Settings.
Chapter 3 — Configure the Computer
49