Default Configuration; Data Collection - Intermec CK3R User Manual

Appendix B — Default Settings

Default Configuration

Data Collection

106
The following tables list the default values of the configuration
commands supported on the CK3. If you restore the CK3 to factory
default settings, the CK3 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. For detailed information on most of the
commands, see the
Manual, available from the Intermec website at www.intermec.com.
Data Collection Settings
Data Collection Setting
Enable Scanner Port
Enable Scanner Auto-Detect
Scanner Port Baud Rate
Symbology Settings
Symbology
Australian Post
Aztec
BPO
CanadaPost
Codabar
Codablock A
Codablock F
Code 11
Code 39
Code 93
Code 128/GS1-128
DataMatrix
DutchPost
Intermec Settings Command Reference
CK3R and CK3X Mobile Computer User Manual
Default Value
Enable
Enable
38400
Default Value
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Enable
Disable
Enable
Enable
Disable