NordicTrack 29835.0 User Manual page 12

14. Attach the Front Console Cover (79) around the
Upright (4) by pressing the tabs on the Front
Console Cover into the Rear Console Cover
(80).
15. See step 5. Tighten the six M8 x 43mm Button
Bolts (96).
See step 4. Tighten the eight M10 x 20mm
Screws (91).
Identify the Right Front and Rear Arm Covers
(65, 66), which are marked with "Right" stickers.
Attach the Right Front Arm Cover (65) to the
Right Upper Body Arm (61) with two M4 x 16mm
Screws (101).
Attach the Right Rear Arm Cover (66) around the
Right Upper Body Arm (61) by pressing the tabs
on the Right Rear Arm Cover into the Right Front
Arm Cover (65).
Attach the Left Front and Rear Arm Covers
(67, 68) in the same way.
Then, slide the Upright Cover (81) downward
and press it into the Left and Right Front Shields
(73, 74).
16. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.
14
80
15
68
67
101
66
81
12
4
65
61
73, 74
79