NordicTrack E9.5i User Manual

Hide thumbs

Table Of Contents

www.nordictrack.ca

USER'S MANUAL

Model No. 24035C.0

Serial No.

Write the serial number in the space

above for reference.

Serial Number

Decal

ACTIVATE YOUR

WARRANTY

To register your product and

activate your warranty today,

go to www.iconservice.ca.

CUSTOMER SERVICE

Call toll-free 1-888-936-4266

Mon.–Fri. 7:30 a.m.–4:30 p.m. ET

(excluding holidays)

or email us at

customerservice@iconcanada.ca

Please do not contact the store.

CAUTION

Read all precautions and

instructions in this manual before

using this equipment. Keep this

manual for future reference.

Table of Contents

Summary of Contents for NordicTrack E9.5i

Page 1 USER’S MANUAL Model No. 24035C.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.iconservice.ca. CUSTOMER SERVICE Call toll-free 1-888-936-4266 Mon.–Fri.
Page 2: Table Of Contents
IFIT and NORDICTRACK are registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The BLUETOOTH word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4 18. The elliptical does not have a freewheel; the 20. Over exercising may result in serious injury pedals will continue to move until the fly- or death. If you feel faint, if you become short wheel stops. Reduce your pedaling speed in of breath, or if you experience pain while a controlled way.
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK E 9.5 I elliptical. The E 9.5 I elliptical manual. To help us assist you, note the product model ®...
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
Page 8: Assembly
ASSEMBLY • Assembly requires two persons. requires the following tools: one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing two adjustable wrenches materials until you finish all assembly steps. one rubber mallet •...
Page 9 3. Press the Cover Mounts (106) on the underside of the Rear Stabilizer Cover (15) into the Rear Stabilizer (2). 4. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step.
Page 10 5. Orient the Upright (4) as shown. Tip: Avoid pinching the Main Wire (110). Avoid pinching the Main Wire (110) and Avoid damaging the indicated plastic tabs avoid damaging the (A). Have a second person hold the Upright (4) tabs (A) on the Frame (1).
Page 11 7. Using a plastic bag to keep your fingers clean, apply some of the included grease to the Pivot Axle (35) and to two 16mm Wave Washers (54). Insert the Pivot Axle (35) through the Upright (4) and center it. Tip: It may be helpful to use a rubber mallet.
Page 12 9. Untie and discard the wire tie on the Main Wire (110). While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Main Wire (110) and to the Sensor Wires (63). Insert the excess wire into the Upright (4).
Page 13 11. Orient the Right Pedal Arm (58) as shown. Apply grease to the axle on the Right Pedal Arm (58). Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 14mm Shoulder Screw (120), a Small Axle Cover (55), and an M8 Washer (97).
Page 14 13. Orient the Rear Upright Cover (81) as shown. Attach the Rear Upright Cover (81) to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them. Next, orient the Front Upright Cover (117) as shown.
Page 15 15. Identify the Right Leg Inner Cover (83) and orient it as shown. Attach the Right Leg Inner Cover (83) to the Right Upper Body Leg (60) with an M4 x 16mm Screw (101) and an M5 Washer (32). Next, identify the Right Leg Outer Cover (69) and orient it as shown.
Page 16 17. Orient the Rear Console Cover (80) as shown. Attach the Rear Console Cover (80) to the Upright (4) with two M4 x 16mm Screws (101). Next, orient the Front Console Cover (79) as shown. Attach the Front Console Cover (79) to the Rear Console Cover (80) with two M4 x 16mm Screws (101).
Page 17: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should mal- be used to function or break down, grounding provides a path of connect the Adapter least resistance for electric current to reduce the risk power cord...
Page 18 HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving If the elliptical rocks slightly on your floor during use, it requires two persons. Stand in front of the elliptical, turn one or both of the leveling feet beneath the rear of hold the upright, and place one foot against one of the the frame or turn the leveling foot under the center of...
Page 19 HOW TO EXERCISE ON THE ELLIPTICAL To mount the elliptical, hold the handlebars or the Upper upper body arms and step onto the pedal that is in the Body Arms lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion.
Page 20 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals and the incline of the ramp with the touch of a button.
Page 21 HOW TO USE THE MANUAL MODE Calories (flame icon)—This display will show the approximate number of calories you have burned. 1. Begin pedaling or press any button on the When some onboard workouts are selected, this console to turn on the console. display will show the number of calories remaining to be burned for the workout.
Page 22 Watts—This display will show your approximate If there are power output in watts. sheets of plas- tic on the metal Average Watts (AVG.)—This display will show contacts on the handgrip heart your approximate average power output in watts for the workout. rate monitor, remove the plas- Scan Mode and Priority...
Page 23 HOW TO USE AN ONBOARD WORKOUT As you exercise, you will be prompted to keep your pedaling speed near the target speed for the 1. Begin pedaling or press any button on the current segment. When the words GO FASTER console to turn on the console.
Page 24 HOW TO CONNECT YOUR SMART DEVICE TO THE 4. Disconnect your smart device from the console CONSOLE if desired. The console supports BLUETOOTH connections to To disconnect your smart device from the console, smart devices via the iFit app and to compatible heart press and hold the Bluetooth Smart button on the rate monitors.
Page 25 HOW TO USE THE SOUND SYSTEM THE OPTIONAL CHEST HEART RATE MONITOR To play music or audio books through the console Whether your sound system while you exercise, plug a 3.5 mm male goal is to to 3.5 mm male audio cable (not included) into the burn fat or to jack on the console and into a jack on your personal strengthen your...
Page 26 HOW TO CHANGE CONSOLE SETTINGS Incline System Calibration—To calibrate the incline system, press the Incline increase or 1. Select the settings mode. decrease button. The ramp will move upward and downward as it calibrates. When the ramp stops To select the settings mode, press the Settings moving, the incline system is calibrated.
Page 27: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE Next, using a standard Regular maintenance is important for optimal screwdriver, remove performance and to reduce wear. Inspect and properly the left Disc (71). tighten all parts each time the elliptical is used. Replace any worn parts immediately. To clean the elliptical, use a damp cloth and a small amount of mild soap.
Page 28 HOW TO ADJUST THE DRIVE BELT See EXPLODED DRAWING C on page 35. Identify the Left and Right Shields (73, 74). Remove If the pedals slip while you are pedaling, even while the M4 x 19mm Screws (5), the M4 x 25mm Screws the resistance is adjusted to the highest level, the drive (127), and the M4 x 48mm Screw (107) from the Left and Right Shields;...
Page 29: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 30 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
Page 31: Part List
PART LIST Model No. 24035C.0 R0816A Key No. Qty. Description Key No. Qty. Description Frame Roller Rear Stabilizer Pedal Arm Cap Ramp Large Axle Cover Upright 16mm Wave Washer M4 x 19mm Screw Small Axle Cover Front Stabilizer Roller Arm Bushing Console Inner Arm Bearing Roller Guide...
Page 32 Key No. Qty. Description Key No. Qty. Description M4 x 16mm Screw M8 x 14mm Shoulder Screw M8 Locknut Small Frame Bushing M6 x 12mm Screw Clevis Pin M10 x 122mm Screw Plastic Spacer M10 Split Washer M4 x 19mm Self-tapping Screw Cover Mount Bumper M4 x 48mm Screw...
Page 33: Exploded Drawing
EXPLODED DRAWING A Model No. 24035C.0 R0816A...
Page 34 EXPLODED DRAWING B Model No. 24035C.0 R0816A...
Page 35 EXPLODED DRAWING C Model No. 24035C.0 R0816A...
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

24035c.0

NordicTrack E9.5i User Manual

Table of Contents

Related Manuals for NordicTrack E9.5i

Summary of Contents for NordicTrack E9.5i

This manual is also suitable for:

Table of Contents