Sntp Settings; Time Setting - D-Link DES-3010F Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

SNTP Settings

Time Setting

To configure the time settings for the Switch, open the Administration folder, then the SNTP Settings folder and click on
the Time Setting link, revealing the following screen for the user to configure.
The following parameters can be set or are displayed:
Parameter
Current Time
Time Source
SNTP State
SNTP Primary Server
SNTP Secondary
Server
SNTP Poll Interval in
Seconds
Year
Month
Day
Time in HH MM SS
Click Apply to implement your changes.
Figure 6- 12. Current Time Settings window
Description
Time Settings - Current Time
Displays the current time.
Displays the source of the time settings viewed here.
Use this pull-down menu to Enable or Disable SNTP.
The IP address of the primary server the SNTP information will be taken from.
The IP address of the secondary server the SNTP information will be taken from.
The interval, in seconds, between requests for updated SNTP information.
Time Settings - Set Current Time
Enter the current year, if you want to update the system clock.
Enter the current month, if you would like to update the system clock.
Enter the current day, if you would like to update the system clock.
Enter the current time in hours and minutes, if you would like to update the system
clock.
SNTP Settings
40