Snmp Group Table - D-Link DES-3010F Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

SNMP Group Table

An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in
the previous menu. To view the SNMP Group Table, open the SNMP Manager folder, located in the Administration
folder, and click the SNMP Group Table entry. The following screen should appear:
Figure 6- 22. SNMP Group Table
To delete an existing SNMP Group Table entry, click the corresponding under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the hyperlink for the entry under the
Group Name.
Figure 6- 23. SNMP Group Table Display – View window
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP
Group Table page. This will open the SNMP Group Table Configuration page, as shown below.
50