Port Err-Disabled - D-Link DES-3010F Manual
Managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots
Hide thumbs
Also See for DES-3010F:
- Command line interface manual (231 pages) ,
- User manual (225 pages) ,
- Manual (186 pages)
Table of Contents
Advertisement
DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Port Err-Disabled
The following window is used to view information about ports that have had their connection status disabled, because of a
STP LoopBack detection. To view the following window, open the Administration folder and click the Port Error
Disabled link.
The following information can be viewed in the preceding window:
Parameter
Port
State
Connection
Reason
Description
Figure 6- 5. Port Error Disabled window
Description
Denotes the port on the Switch that has been disabled.
Describes the current running state of the port in question, whether enabled or disabled.
Describes the current running state of the port in question. This field will read err-
disabled when a port has been disabled due to connection errors.
Describes the reason for the error of the current running state of the port, which is STP
LBD or Spanning Tree LoopBack Detection.
Displays the pre-configured description of the port, configured by the user.
34
Advertisement
Table of Contents
