D-Link DES-3010F Manual page 79

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to
•
enter a password for authentication from the Candidate Switch before being added to the SIM group. Click OK
to enter the password or Cancel to exit the window.
Property - to pop up a window to display the device information, as shown below.
•
This window holds the following information:
Parameter
Device Name
Module Name
MAC Address
Remote Port No.
Local Port No.
Port Speed
Click Close to close the Property window.
Figure 6- 45. Input password window.
Figure 6- 46. Device Property window.
Description
This field will display the Device Name of the switches in the SIM group configured by
the user. If no Device Name is configured by the name, it will be given the name
default and tagged with the last six digits of the MAC Address to identify it.
Displays the full module name of the switch that was right-clicked.
Displays the MAC Address of the corresponding Switch.
Displays the number of the physical port on the MS or CaS that the CS is connected
to. The CS will have no entry in this field.
Displays the number of the physical port on the CS that the MS or CaS is connected
to. The CS will have no entry in this field.
Displays the connection speed between the CS and the MS or CaS
66