Smtp Service - D-Link DES-3010F Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Mail Receiver Address
Click Apply to implement changes made.

SMTP Service

The following window is used to send test messages to all mail recipients configured on the Switch, thus testing the
configurations set and the reliability of the SMTP server. To access the following window, open the Administration
folder, then the SMTP Service Folder and click the SMTP Service link.
The following parameters can be set:
Parameter
Subject
Content
Once your message is ready, click Send to send this mail to all recipients configured on the Switch for SMTP.
Enter a list of e-mail addresses so recipients can receive e-mail messages
regarding Switch functions. Up to 8 e-mail addresses can be added per Switch. Do
delete these addresses from the Switch, click it's corresponding
heading in the Mail Receiver Address Table.
Figure 6- 56. SMTP Mail Service
Description
Enter the subject of the test e-mail.
Enter the content of the test e-mail.
74
under the Delete