Table of Contents
Advertisement
5.
Release the ZIF connector (2) to which the TouchPad cable is connected and disconnect the
TouchPad cable (3).
6.
Remove the two Phillips PM2.0×4.0 screws (4) that secure the top cover to the base enclosure.
7.
Lift the top cover straight up and remove it.
Reverse this procedure to install the top cover.
Component replacement procedures
57
- Quick Links:
- Product Description
- Display Components
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TouchSmart tx2 and is the answer not in the manual?