Table of Contents
Advertisement
H RS - 1 S U s e r G u i d e
F r o n t P a n e l F e a t u r e s
Front Panel Features
Power
Volume
Headphones
8 2 1 5 3 5 :
H R S - 1 S U s er G u i d e
6
© 2 0 1 0 Wo h l e r Tec h n o l o g i e s , I n c. A l l r i g h t s r e s er ve d .
Figure 1–1
Input A/B Select
•
Power Indication (Green LED): This LED glows green to indicate
the HRS-1S is connected to operational mains power.
•
Headphone Output (1/4" Jack): For full stereo monitoring use the
headphone output feature. Note that in order to monitor the audio
in stereo through the headphones you will need to place the A/B
select switch to both. When you plug in headphones, the internal
speakers will mute. This jack accepts a standard 1/4" phone type
stereo plug.
•
Volume Control (Rotary Pot): This controls the loudness of the
audio reproduced by the internal speakers or connected headphone.
Clockwise rotation of this control increases the loudness of the
monitored audio.
•
A/B Select (Three-Position Toggle Switch): Use both to sum the two
channel stereo signals together, or A (or B) to select only one
channel for monaural monitoring through the speakers or
headphones. Note that this switch has no effect on the line output.
•
Speakers: The HRS-1S internal speaker system is comprised of one
mid-range/tweeter speaker and one woofer speaker. The mid-range
speaker reproduces only the mid and high frequencies, while the
woofer speaker reproduces the low frequencies. The two channels
of the stereo input signal are summed together into a monaural
signal for reproduction from the speaker system.
Front Panel Features
Speakers
Advertisement
Table of Contents
