EPSON EPL-6200/EPL-6200L
2.2.9.2 Driving of Duplex Unit
The Duplex Unit is driven as follows: the paper after printing on one side is fed into the
Output Tray once and when the tail end of the paper has left the guide behind the paper
eject roller, the paper eject roller starts rotating to transport the paper into the Duplex
Unit. (See "Figure 2-30")
The paper is transported into the printer body by the duplex unit transport motor.
With the Duplex Unit installed, the paper eject roller is separated from the drive on the
printer body and is driven by the inversion motor in the Duplex Unit.
(See "Figure 2-31")
Operating Principles
Duplex Unit Inversion Motor (M5)
Duplex Unit Drive
Motor (M4)
Description of Mechanisms
Figure 2-30. Driving of Duplex Unit
Figure 2-31. Driving of Inversion Motor
Revision A
Transport Roller 1
Transport Roller 2
91