White Out; Back Of Paper Gets Dirty - Epson EPL-6200 Service Manual

EPSON EPL-6200/EPL-6200L

3.6.2 White Out

Step Action and Question
Paper check
1
♦ Is the paper moist?
Photoconductor roller
2
♦ Is the OPC drum scratched or seamed?
Checking the inside of printer
3
♦
Is there any foreign matter on the paper path?
Transfer roller
♦ Is the Transfer Roller scratched or soiled?
4
Troubleshooting
Description of the problem:
In the image, there are extremely light areas or
areas where image is completely missing.
Parts that may be the source of this error
Photoconductor Unit (
p.135)
Transfer Roller
(p.136)
High Voltage Unit (HV1)
(p.151)
Main Board Assy (C533/C534 Main)
(p.146)
Yes
Set the paper
taken from a
Go to Step 2
newly opened
package.
Replace the
Photoconductor Go to Step 3
Unit.
Remove the
Go to Step 4
foreign matter.
Replace the
high voltage
Replace the unit (HV1).
transfer roller. Replace the
Main Board
Assy.
Troubleshooting for Print Quality Problems

3.6.3 Back of Paper Gets Dirty

No Step
Checking the inside of printer
1
♦ Is there any foreign matter on the paper path?
Fusing roller
2
♦
Is the fusing roller scratched or soiled?
Transfer roller
3
♦
Is the Transfer Roller scratched or soiled?
Description of the problem:
The back side of the paper is soiled.
Parts that may be the source of this error
Fuser Unit
(p.152)
Transfer Roller
Action and Question
Remove the
foreign
matter.
Replace the
Fuser Unit
(fusing
roller).
Replace the
transfer roller.
Revision A
(p.136)
Yes No
Go to Step 2
Go to Step 3
125