Replacing The Front Usb Panel - Dell Studio XPS 7100 Service Manual

Replacing the Front USB Panel
CAUTION: Take care not to damage the cable connectors and the cable routing clips when sliding the front USB panel into the front USB panel
clamp slot.
1. Follow the instructions in Before You
2. Align and slide the front USB panel clamps into the front USB panel clamp slot.
3. Replace the screw that secures the front USB panel to the front panel.
4. Connect the front USB panel cables to the system board connector F_USB2 (see
5. Replace the front bezel (see
6. Replace the computer cover (see
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Replacing the Front Bezel).
Replacing the Computer Cover).
System Board Components).