Dell Studio XPS 7100 Service Manual page 44

Displays the processor L1 cache size
Processor Cache L1
Displays the processor L2 cache size
Processor Cache L2
Displays the processor L3 cache size
Processor Cache L3
Indicates the amount of installed memory in MB
Memory Installed
Indicates the amount of memory available in MB
Memory Available
Indicates the memory speed in MHz
Memory Speed
Indicates the memory technology; DDR3
Memory Technology
Standard CMOS Features
Displays the current time in hh:mm:ss format
System Time
Displays the current date in mm:dd:yy format
System Date
Displays the SATA1 drive integrated in the computer
SATA1
Displays the SATA2 drive integrated in the computer
SATA2
Displays the SATA3 drive integrated in the computer
SATA3
Displays the SATA4 drive integrated in the computer
SATA4
Displays the SATA5 drive integrated in the computer
SATA5
Displays the eSATA drive integrated in the computer
eSATA
Advanced BIOS Features
CPU Feature
USB Device Setting
Advanced Chipset Features
Enabled or Disabled (Enabled by default)
Onboard Audio Controller
ATA/RAID (RAID by default)
SATA Mode
Enabled or Disabled (Enabled by default)
Onboard LAN Controller
Enabled or Disabled (Disabled by default)
Onboard LAN Boot ROM
Boot Device Configuration
Boot Settings Configuration Configures the settings during system boot
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected
Hard Disk Boot Priority
CD/DVD Drives Boot Priority Sets the CD/DVD drive boot priority. The items displayed are dynamically updated according to the drives detected
Specifies the boot sequence from the available devices
1st Boot Device
Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
Specifies the boot sequence from the available devices
2nd Boot Device
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
Specifies the boot sequence from the available devices
3rd Boot Device
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
No; Yes (Yes by default)
Boot Other Device
Power Management Setup
Specifies the ACPI suspend type. The default is S3
ACPI Suspend Type
This option turns on the computer when you try to access the computer through the LAN (Enabled by default)
Remote Wake Up
Specifies the behavior of the computer after recovering from a power loss (Off by default)
AC Recovery
Enables you to set an alarm to turn on the computer automatically
Auto Power On
BIOS Security Features
Status of supervisor installed
Supervisor Password
Secure Virtual Machine Mode — Enabled or Disabled (Enabled by default)
l
AMD Cool 'N' Quiet — Enabled or Disabled (Enabled by default)
l
USB Controller — Enabled or Disabled (Enabled by default)
l
USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
l
On — The computer turns on after it recovers from a power failure
l
Off — The computer remains off
l
Last — The computer returns to the power state it was in before the power failure
l