Replacing The Front I/O-Panel; Procedure; Post-Requisites - Dell Inspiron 3662 Service Manual

Hide thumbs Also See for Inspiron 3662:
Table of Contents

Advertisement

Available languages

Available languages

Replacing the front I/O-panel

AVERTISSEMENT : Avant d'ouvrir votre ordinateur, prenez connaissance
des consignes de sécurité fournies et suivez les instructions indiquées à la
section
Avant une intervention à l'intérieur de
intervention à l'intérieur de l'ordinateur, suivez les instructions indiquées à la
section
Après une intervention à l'intérieur de
d'autres bonnes pratiques en matière de sécurité à la page d'accueil du site
Regulatory Compliance (Conformité à la réglementation), à l'adresse
www.dell.com/regulatory_compliance.

Procedure

1
Place the I/O board in the slot on the chassis.
2
Align the screw holes on the I/O board with the screw holes on the chassis.
3
Replace the two screws (#6–32 UNC 1/4'') that secure the I/O board to the
chassis.
4
Connect the I/O-board cable to the I/O board.

Post-requisites

1
Replace the
front
2
Replace the
computer
68
bezel.
cover.
l'ordinateur. Après une
l'ordinateur. Vous trouverez

Advertisement

Table of Contents
loading

Table of Contents