Replacing the front I/O-panel
VARNING: Innan du utför något arbete inuti datorn ska du läsa
säkerhetsinstruktionerna som medföljde datorn och följa stegen i
utför något arbete inuti
anvisningarna i
metoder för säkert handhavande finns på hemsidan för regelefterlevnad på
www.dell.com/regulatory_compliance.
Procedure
1
Place the I/O board in the slot on the chassis.
2
Align the screw holes on the I/O board with the screw holes on the chassis.
3
Replace the two screws (#6–32 UNC 1/4'') that secure the I/O board to the
chassis.
4
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
front
2
Replace the
computer
datorn. När du har arbetat inuti datorn följer du
När du har arbetat inuti
bezel.
cover.
datorn. Mer information om bästa
Innan du
67