Replacing The Secondary Hard Drive; Replacing The Hard Drive Cage; Replacing The Primary Hard Drive - Dell Studio XPS 7100 Service Manual

1 screws (4)
3 secondary hard drive

Replacing the Secondary Hard Drive

1. Follow the instructions in Before You
2. Check the documentation that shipped with the drive to verify that it is configured for your computer.
3. Slide the secondary hard drive into the hard drive cage.
4. Align the screw holes on the hard drive with the screw holes on the hard drive cage.
5. Replace the four screws that secure the secondary hard drive to the hard drive cage.

Replacing the Hard Drive Cage

1. Follow the instructions in Before You
2. Align the screw holes on the hard drive cage with the screw holes on the chassis.
3. Replace the three screws that secure the hard drive cage to the chassis.
4. If applicable, connect the power and data cables to the secondary hard drive (see

Replacing the Primary Hard Drive

1. Follow the instructions in Before You
2. Check the documentation that shipped with the drive to verify that it is configured for your computer.
3. Slide the primary hard drive into the hard drive cage.
4. Align the screw holes on the primary hard drive with the screw holes on the chassis.
5. Replace the four screws that secure the primary hard drive to the chassis.
6. Connect the power and data cables to the primary hard drive (see
7. Replace the computer cover (see
8. Connect your computer and devices to electrical outlets, and then turn them on.
9. See the documentation that shipped with the drive for instructions on installing any software required for drive operation.
2 hard drive cage
Begin.
Begin.
Begin.
Replacing the Computer Cover).
System Board Components).
System Board Components).