Wacom DTF-521 Installation Manual And User's Manual
  1. Manuals
  2. Brands
  3. Wacom Manuals
  4. Graphics Tablet
  5. DTF-521 series
  6. Installation manual and user's manual
Wacom DTF-521 Installation Manual And User's Manual

Wacom DTF-521 Installation Manual And User's Manual

Interactive pen display
Hide thumbs Also See for DTF-521:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual and Installation Instructions, User Manual
DTF-521
interactive pen display
Installation Guide & User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Wacom DTF-521

Summary of Contents for Wacom DTF-521

  • Page 1 DTF-521 interactive pen display Installation Guide & User’s Manual...
  • Page 2 Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual.

  • Page 3: Introduction And Overview

    The DTF-521 also comes equipped with a VGA pass-thru ( simultaneously connect a VGA monitor or projector to the pen display. This manual describes how to install the DTF-521 hardware and software. It also describes how to use the DTF-521 and pen. Please follow all instructions carefully.

  • Page 4: Precautions

    Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the product.

  • Page 5: Usage

    USAGE Only use the power adapter that came with the DTF-521. If a different type of power ARNING adapter is used, the DTF-521 will not work properly or may be damaged. Using a different type of power adapter also has the potential to result in fire. Use of a different power adapter will void your warranty.
  • Page 6 • Before cleaning, always disconnect your product from the AC power source. Do not expose the DTF-521 to high voltage electrostatic discharges or to a build-up of AUTION an electrostatic charge on the LCD screen. This may result in a temporary discoloration and blotching of the display.

  • Page 7: Table Of Contents

    Customizing the pen ........20 Calibrating the DTF-521 ........22 Customizing the Pop-up Menu .
  • Page 8 Uninstalling the DTF-521 ........

  • Page 9: Your New Dtf-521

    PACKAGE CONTENTS Carefully unpack all items and place them on a desktop or stable work surface. Verify that your package contents are complete. DTF-521 interactive pen display, main unit Pen with replacement nibs, pen tether, tether connection ring, and attachment screw (FP-320, PKB-A016, MHO-A052, and MNE-A061) Installation Guide &...

  • Page 10: Interactive Pen Display Components

    Your new DTF-521 Page 8 Power LED Lights blue when power has been supplied to the DTF-521 and a video signal is present. Glows orange when no video signal is detected by the DTF-521. (e.g., Your computer is turned off, starting up, or has entered a power management mode in which video signals are not sent.)

  • Page 11: Rear View

    Important: Always store the pen display on a stable surface or in its original packing carton when not in use. Be sure to adjust the stand to the low tilt position before packaging the DTF-521. If you do not close the stand, the notched mechanism may be damaged during transportation and storage.

  • Page 12: Installation

    Macintosh. OS X, v10.3.9 or greater. VGA video connector, available USB port, and CD-ROM drive. Notes: The DTF-521 can be used alone or with another display. You may connect a second VGA device such as a monitor or LCD projector to the DTF-521 device will mirror the image on the DTF-521.

  • Page 13: Step 1: Lcd Monitor Installation

    STEP 1: LCD MONITOR INSTALLATION In the first stage of the installation process, the DTF-521 is installed as a monitor on your system. As you work through the first stage of the installation process, please refer to the LCD monitor cabling diagram on the following page when making cable connections.

  • Page 14: Lcd Monitor Cabling Diagram

    DTF-521 or your computer are turned on. AUTION Use only the power adapter that came with the DTF-521; use of an improper power adapter may damage the unit. Do not connect or disconnect the video or power cables while the DTF-521 or your computer are turned on –...
  • Page 15 See the video card manufacturer’s documentation for details. Windows: If you are using the DTF-521 as a secondary display, you may first need to enable the DTF-521 in your Display Properties control panel.

  • Page 16: Step 2: Pen Tablet Installation

    USB CABLE INSTALLATION Plug the square end of the USB cable into the DTF-521 port labeled USB. Plug the other end into an available USB port on your computer or on a USB hub attached to your computer. See – D – in the diagram below.

  • Page 17: Software Installation

    Save your work and close all open applications. Temporarily disable any virus protection programs. • Insert the Wacom Pen Tablet Driver CD into your computer’s CD-ROM drive. If the software installer menu does not automatically display, double-click on the I •...

  • Page 18: Working With Your Dtf-521

    Tips: • Be careful that you do not pull the cables out of their connections by accidentally moving the DTF-521 too far from the computer. • The pen tether can be used to ensure your pen stays with your pen display. Simply loop one end of the tether through the tether hole located on the pen, and the other end of the tether through the tether connection ring.

  • Page 19: Using The Pen

    As you work, you can rest your hand lightly on the DTF-521 display screen, just as if it were a drawing board or sheet of paper. You can tilt the pen in any way that feels most comfortable for drawing.

  • Page 20: Pen Operations

    Note: You must calibrate the pen display tablet to correctly align the screen cursor with the pen tip. (See Calibrating the DTF-521 on page 22.) If the screen cursor does not jump to a position close to the pen tip when you place the pen on the display screen, then the pen tablet driver may not be installed or is not loading.

  • Page 21: Customizing

    When more than one Wacom tablet is installed on a single computer, any changes made in the Pen Tablet control panel will be applied only to the tablet that was last used before opening the control panel.

  • Page 22: Control Panel Overview

    CONTROL PANEL OVERVIEW Use the Pen Tablet control panel to customize your product. Experiment with different settings to find what works best for you. Any changes you make will take effect immediately, but you can always click to return to the factory settings. EFAULT Tool tips are available for most control panel items.
  • Page 23 You can change the S WITCH the way you like to use the pen when making right-clicks or other click functions. Click on the A button. In the dialog box that DVANCED appears: • Select H to perform click OVER LICK functions without touching the pen tip to the tablet surface.

  • Page 24: Calibrating The Dtf-521

    This is required to adjust for parallax caused by the display screen cover glass and coating. Set the DTF-521 in its working position, then follow the procedure below. Important: Make sure the display is properly adjusted before calibrating the tablet.

  • Page 25: Customizing The Pop-Up Menu

    CUSTOMIZING THE POP-UP MENU Use the P tab to define the available functions on the Pop-up Menu list. To display the Pop-up Menu, set a pen button to the P button, the Pop-up Menu is displayed. Select from available items in the Pop-up Menu by clicking on them.

  • Page 26: Control Panel Details

    (pixel-level) panning within a document or image. A slower setting reduces the scroll rate and is useful for close-up and detail work where you need precise control of the image. Customizing Page 24 and then sliding the pen tip across the DTF-521 display CROLL ORWARD...
  • Page 27 PC I . (Tablet PCs and Windows Vista systems that support the Tablet PC Input ABLET NPUT ANEL Panel.) Opens the Tablet PC Input Panel when you press a tool button set to this function. . (Windows Vista and Tablet PC systems that include Microsoft Journal.) Opens Microsoft OURNAL Journal.
  • Page 28 ... Enables you to simulate keystrokes. Selecting this option displays the D EYSTROKE dialog box where you can enter a keystroke or keystroke sequence to play back. EYSTROKE You can manually enter a keystroke or keystroke combination in the K entry box.

  • Page 29: Adjusting The Display

    30 to 57 kHz and the vertical frequency is between 45 to 70 Hz for XGA mode, or 45 to 75 Hz for other modes. If the DTF-521 does not automatically synchronize with the incoming signal, you can use the On Screen Display (OSD) R option to initiate display synchronization.
  • Page 30 When you open the OSD menu, the following options are displayed: . Select to ONTRAST increase or decrease image contrast. . Select to HASE reduce or eliminate horizontal distortion lines. To automatically adjust, use the R option. ESET ORIZONTAL ENTER Select to move the screen image left or right.
  • Page 31 . Select to ACKLIGHT increase or decrease the backlight brightness level. . Select to ANGUAGE choose a language option for the OSD. . Provides color OLOR temperature settings for 9300˚, 6500˚, and 5000˚ Kelvin. displays the IRECT received signal as it is without any adjustment.

  • Page 32: Adjusting Pitch And Phase

    ADJUSTING PITCH AND PHASE Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521 is first connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the resolution of your video card to 1024 x 768.

  • Page 33: Power Saving

    POWER SAVING The DTF-521 conforms to VESA and ENERGY STAR When using the DTF-521 with a Display Power Management Signaling (DPMS) compliant computer or video card, the display will automatically comply with the below power saving parameters. When these power-saving functions are in effect, the screen display is darker than usual.

  • Page 34: Troubleshooting

    TROUBLESHOOTING Most of the time your pen display tablet will work flawlessly. But if you are having trouble, Wacom recommends you do the following: 1. If the Wacom tablet driver failed to load properly, first perform the recommended action in any error message that may appear on your screen.
  • Page 35 • If the LED does not light, verify that the DTF-521’s USB cable is plugged into an active USB port. If the DTF-521 is plugged into a USB hub, try plugging it directly into the USB port on your computer.

  • Page 36: Display Troubleshooting

    DISPLAY TROUBLESHOOTING If you encounter problems with the DTF-521 display, refer to the following tables; your problem may be described here and you can try the solution offered. For additional information about color issues, refer to the documentation that came with your operating system or applications.

  • Page 37: Vga Problems

    • Set the display resolution of your video card to 1024 x 768. • Turn off the DTF-521, then turn it back on. • Open the OSD menu, go to the R option. If necessary, manually adjust the brightness, pitch, DJUST and phase settings.

  • Page 38: Pen Tablet Troubleshooting

    If you encounter problems with the DTF-521 pen display, refer to the following tables. Your problem may be described here, and you can try the solution offered. Be sure you refer to the DTF-521 Read Me file for the latest information.
  • Page 39 Be sure you are using the pen that originally came with your pen function. display. Other pens may not function properly on the DTF-521 pen display. Make sure the status LED lights blue when the tip is pressed. If the LED does not light, verify that the USB cable is plugged into an active port on your computer or on a USB hub.
  • Page 40 Open the Pen Tablet control panel and select the C Continue with Calibrating the DTF-521 on page 22. Make sure the Wacom tablet driver has loaded properly by opening the Pen Tablet control panel. If the driver did not load you will see an error message.
  • Page 41 Leaving your pen on the display may interfere with screen cursor positioning when using other input devices. The screen cursor moves The tablet portion of the DTF-521 emits electromagnetic waves at a erratically or jumps around certain frequency. If another tablet is too closely placed to the on the display screen when DTF-521 it may interfere with screen cursor positioning.

  • Page 42: Windows-Specific Problems

    . Select USB from the H ROFILER list. A Wacom USB pen display model should be listed. If a pen display model is not listed, check the pen display’s USB cable connection or try plugging the pen display into a different USB port.

  • Page 43: Technical Support Options

    If you cannot find the answer in this guide, you may find updated information about your problem in the appropriate Read Me file for your platform (located on the Wacom Pen Tablet Driver CD). You can also check the product FAQs (Frequently Asked Questions) on the Wacom web site for your region.

  • Page 44: Obtaining Driver Downloads

    Wacom periodically updates the pen tablet software driver to maintain compatibility with new products. If you are having a compatibility problem between your DTF-521 pen display and a new hardware or software product, it may be helpful to download a new Wacom tablet software driver (when available) from the Internet.

  • Page 45: Appendix

    CLEANING To clean the DTF-521 casing or the pen, use a soft, damp cloth; you can also dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine, alcohol, or other solvents to clean the unit casing or pen.

  • Page 46: Replacing The Pen Tip

    REPLACING THE PEN TIP The pen tip (nib) will wear with normal use. Excessive pressure will cause the nib to wear sooner. A worn nib may damage the coating on the DTF-521 display screen. To avoid this, periodic tip replacement is recommended.

  • Page 47: Using An Alternate Mount Or Stand

    USING AN ALTERNATE MOUNT OR STAND If you will be using the DTF-521 in an installation that requires the use of an alternate mounting platform, you can remove the adjustable stand from the unit and mount the pen display onto any mount arm or stand conforming to the VESA 75 mm standard.

  • Page 48: Pen And Digital Ink Capabilities In Windows Vista

    PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA Microsoft Windows Vista provides extensive support for pen and touch input. When using DTF-521 with a computer running Windows Vista, your experience is enhanced by powerful note taking, handwriting recognition, fast navigation, and other digital inking options designed to give you quick, intuitive results with the Wacom pen.

  • Page 49: About The Windows Vista Tablet Pc Input Panel

    ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL The Windows Vista Tablet PC Input Panel enables you to use handwriting or an on-screen keyboard to directly enter text with your Wacom pen. There are a number of ways to launch the Input Panel: •...

  • Page 50: Uninstalling The Dtf-521

    Enter your administrator login name and password. 3. After the removal is completed, click OK. 4. Shut down your computer and turn off the DTF-521. When your computer and the DTF-521 are off, disconnect the DTF-521 from your computer. Appendix...

  • Page 51: Product Specifications

    Each DTF-521 LCD panel is produced under very stringent quality standards. Production techniques cannot guarantee an absolutely perfect TFT display. Wacom does not allow any pixel to be always white or always black. A small number of pixels (4 or less) are allowed to show a wrong color for some parts of the color spectrum.

  • Page 52: Pen Tablet

    Weight Side switch type ORDERING PARTS AND ACCESSORIES To purchase parts and accessories, refer to the Wacom tablet Read Me file and see who to call for your region. You can also do the following: To purchase parts and accessories in the USA or Canada, call 1.888.884.1870 (toll-free) or visit Wacom’s web site at http://www.WacomDirect.com (USA only).

  • Page 53: Radio And Television Interference

    Plug the equipment and computer into an outlet that is on a different circuit from the television or radio. If necessary, consult your Wacom dealer or an experienced radio/television technician for help. Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product.

  • Page 54: Industry Canada (Canada Only)

    “Cet appareil numerique de la classe (B) est conforme a la norme NMB-003 du Canada.” CE DECLARATION The DTF-521 pen display has been tested and found to comply to the following harmonized European Norms: • EN 55024: 1998+A1:2001+A2:2003 (electromagnetic immunity) •...

  • Page 55: Warranty

    (ii) any loss or damage to the product resulting from such transportation. Wacom shall have no responsibility to repair or replace the product if the failure of the product has resulted from accident, abuse, misuse, negligence, or unauthorized modification or repair, or if it has been handled or stored other than in accordance with Wacom’s storage instructions.
  • Page 56 Wacom repair center. In all other respects, the terms of the warranty as set forth above apply to such sales.

  • Page 57: Warranty

    The purchase of this product from your dealer does not include Wacom's software and the associated rights of usage. Wacom grants you, the user, the right to use the software solely in accordance with the conditions of this software license agreement. By purchasing this product you agree to the terms of this license.
  • Page 58 Wacom shall have no responsibility to repair or replace the product if (a), in the opinion of Wacom, the failure of the product has resulted from accident, abuse, misuse, negligence, misapplication, or unauthorized modification or repair, or (b) the product has been handled or stored other than in accordance with Wacom’s storage instructions, or (c) the failure is due to normal wear and tear, or (d) you fail to fulfill your obligations as described above.
  • Page 59 Asia Pacific Office Harmony Tower 18F, 1-32-2 Hon-Cho, Nakano-Ku, Tokyo 164-0012 Japan Telephone General: +81.3.5309.1513 Fax: +81.3.5309.1514 Wacom Digital Solutions Co., Ltd. Gangnam Telepia B/D 9th Fl, 662-18 Yeoksam-dong, Gangnam-gu, Seoul, 135-080 Korea Telephone General: +82.2.557.3894 Fax: +82.2.557.3895 Wacom Singapore Pte. Ltd. (Singapore)
  • Page 60 DTF-521 interactive pen display Installation Guide & User’s Manual Wacom Co., Ltd. UM-0344 (A)

Table of Contents