Using The Electronic Image Stabilizer (Eis); Recording Subject Using Large Magnification (Digital Zoom); Reducing Wind Noise During Recording (Mic.filter) - Hitachi DZ-MV730A Instruction Manual

USING THE ELECTRONIC IMAGE STABILIZER (EIS)

When you use zoom (see page 56) to record a magnified subject image, it will correct fuzziness in the
recorded image.
1
Press the MENU
button, choose "EIS" on
the "Camera Functions
Setup" menu screen,
and then press the A
button.
2
Choose the "On" or "Off", and then press the
A button.
3
Press the MENU button to end the setting.
●Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
EIS

RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)

See page 56 for setting on digital zoom.

REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)

When recording sound from the microphone built into this DVD video camera/recorder, you can
reduce wind noise in recording.
If "MIC.Filter: ON" is specified, the low-frequency components in the sound picked up by
microphone will be cut off during recording: This makes it easier to hear the target voice or sound
during playback.
1
Press the MENU
button, choose
"MIC.Filter" on the
"Camera Functions
Setup" menu screen,
and then press the A
button.
2
Choose the desired option, and then press the
A button.
90
After recording with EIS set to "Off", it is
Came r a F u nc t i on s Se t u p
recommended that you return the setting to
P r o g r am AE
Wh i t e Ba l . "On" and then turn the DVD video camera/
E I S On
recorder off, unless you normally record with
D i g . Zo om O f f
M IC . F i l t e r
"Off" setting.
ENTER RETURN RAM
Note
• The EIS setting will be stored in memory even when
• It is recommended that you specify "EIS Off" when
• When "EIS On" is specified, there will be a slight
• Gross camera shake may not be entirely corrected
• EIS may not operate correctly when the tele or wide-
0 : 0 0 : 0 0
REM
3 0 MIN
• EIS cannot be used when recording photos on DZ-
8 : 0 0 AM
FINE 9 / 3 0 / 2 0 0 5
3
Camer a F u nc t i on s S e t u p
P r o g r am AE
Wh i t e Ba l .
E I S
D i g . Zoom
M IC . F i l t e r On
O f f
ENTER RETURN RAM
Note
• You can also use the on-
• The MIC.Filter setting will be stored in memory even
• The MIC.Filter function will work only during movie
• The microphone filter function works only with the
:
the DVD video camera/recorder is turned off.
using the DVD video camera/recorder on a desk or
tripod.
difference between the actual movement and the
movement on screen.
even if "EIS On" is specified: Firmly hold the DVD
video camera/recorder with both hands.
conversion lens is used.
GX20A or DZ-MV780A.
Press the MENU button
to end the setting.
:
screen display to confirm
that the MIC.Filter has been
set.
when the DVD video camera/recorder is turned off.
recording.
built-in microphone: It will not function when using an
external microphone (p. 75).
0 : 0 0 : 0 0
REM 3 0 MIN
8 : 0 0 AM
FINE 9 / 3 0 / 2 0 0 5
Microphone filter icon