Table of Contents
Advertisement
Message
Cannot combine scene
of multiple programs.
Create Playlist first, and
then combine scenes.
Cannot combine.
Deselect PHOTO
scenes.
Cannot combine. Select
multiple scenes.
Cannot delete scenes.
Cannot execute.
Change display
category to ALL.
Cannot execute.
Unselect multiple
scenes.
Cannot read disc.
Check dirt/crack/both-
sides contrary/inserted
correctly.
CANNOT RECORD
PHOTOS
Cannot replace
thumbnail on PHOTO
scenes.
Cannot select any more
scenes.
CARD ALMOST FULL
Card error has
occurred.
Format the card now?
Card error has
occurred.
Formatting is not
complete.
Card error.
Card error has
occurred. Keep card
inside & restart.
Cause & Troubleshooting
Scenes in different programs (different recording dates) cannot
be combined. Create a Playlist first, and then combine such
scenes on the playlist.
Select only movies and combine them.
Select a range of at least 2 scenes to be combined, and then
combine them.
This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
This message will appear if you attempt to combine or move
scenes with "Category: VIDEO or PHOTO" specified.
Division or change in thumbnail was executed when multiple
scenes were selected.
Error occurred while the disc was being recognized. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed against the
turntable. See *3 on page 166 for troubleshooting.
Are you using DVD-R disc? You cannot record still image on
DVD-R disc (recordable of still images from PC). Use DVD-RAM
disc to record still images.
The thumbnail of a still cannot be changed.
Select a movie.
The maximum number of selectable scenes is 999.
Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose "YES" and format it.
The card may be damaged: Use another card.
• The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be attempted.
Reference
page
113
113
113
110, 113
136
106
7, 26, 45
24
116
119
29, 110, 133
132
27
27
43, 44
161
Advertisement
Table of Contents
