Table of Contents
Advertisement
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Setting
On
Off
1
Press the MENU
button, use "Operating
Menu" (p. 64) to choose
"Beep" on the "Initial
Setup" menu screen,
and then press the A
button.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Setting
On
Off
1
Press the MENU
button, use "Operating
Menu" (p. 64) to choose
"Power Save" on the
"Initial Setup" menu
screen, and then press
the A button.
2
Select "On" or "Off", and then press the A
button.
3
Press the MENU button to end the setting.
100
Beep is heard when the power switch is changed over, the REC button is
pressed, etc.
No beep is heard.
I n i t i a l S e t u p
On
Be e p
Po w e r S a v e
Of f
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
ENTER
RETURN
RAM
To engage power save. If the DVD video camera/recorder is left in the recording
pause status without being operated for 5 minutes, it will automatically turn off to
prevent the battery from discharging needlessly.
To cancel power save.
I n i t i a l S e t u p
Be e p
On
Po w e r S a v e
R e c o r d LED
Of f
L a n g u a g e
Demo Mode
Reset
ENTER
RETURN
RAM
Content
2
Select "On" or "Off", and then press the A
button.
3
Press the MENU button to end the setting.
:
Note
The "Beep" setting will be stored in memory even when
the DVD video camera/recorder is turned off.
Content
:
Note
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to "OFF", and then set it to "O",
"N" or "P"
• The Power Save setting will not appear in the on-
screen information display.
• The Power Save setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
123
Advertisement
Table of Contents
