Table of Contents
Advertisement
3
Start recording (p. 51).
1 Open the LCD monitor (p. 35).
2 While holding down the button on the
right of power switch, set the switch to
"P".
:
Note
• With the DZ-GX20A only, the built-in flash may emit light in a dark area (see page 76).
• See page 24 for the cards that can be used on this DVD video camera/recorder.
• See Check 2 on p. 158 if recording is not possible with "P".
4
View the playback of recorded content on LCD monitor screen (p. 35).
1 Press the A button in recording pause
status: The recorded scene will be played
back.
2 Press the C button to stop playback.
3 Press the PHOTO button half way (half
press): When a subject image is focused,
the "m" indicator will turn purple.
4 Press the PHOTO button all the way (full
press).
2
1
STOP/EXIT
23
Advertisement
Table of Contents
